NCL-2622-29 LVT-PROTECT LUXURY VINYL TILE ENHANCER 1GAL, EA
NCL-2622-29 LVT-PROTECT LUXURY VINYL TILE ENHANCER 1GAL, EA
Use LVT-PROTECT™ Luxury Vinyl Tile Enhancer to provide a maintainable “wear layer” to improve cleaning efficiency, protect your LVT investment and should be part of a complete LVT maintenance program. Common foot traffic, spills and more wear away at the surface of the LVT. LVT-PROTECT™ Luxury Vinyl Tile Enhancer creates a clear, protective barrier that adds a low, satin shine to reveal the true character, color and beauty of the original product. This water resistant coating improves slip resistance (UL Listed), and improves the cleaning ability on the surface. LVT-PROTECT™ is recommended for use on any luxury vinyl tile. Use it on new LVT to protect and enhance the original beauty and look. Use it on worn LVT to restore and revitalize the look of the surface. If needed, it can be scrubbed and recoated with NCL® QWIK-SCRUB™ which complies with LVT manufacturers recommendation of using products below the pH of 10. LVT-PROTECT™ can also be used on linoleum, no-wax floors, and synthetic surfaces.
Key Market Information
-
Directions
NEW LUXURY VINYL TILE PROCEDURES:
1. Dust mop floor to remove all dry soil and loose debris prior to cleaning.
2. Clean the surface using NCL® QWIK-SCRUB™ at a 1:10 dilution using a mop and bucket or automatic scrubber and a RED cleaning pad. Rinse and allow to dry thoroughly.
3. Using a wet mop or microfiber applicator, apply LVT-PROTECT™ at a rate of 1000 sq. ft. per gallon. Allow to dry thoroughly
4. Worn, dull, lifeless LVT may require more than one application. Repeat step 3 as desired, being sure to allow adequate time for drying between each coat.
5. Routine cleaning is recommended using NCL® LVT-CLEAN to prolong the life of the coating and LVT.
SCRUB AND RECOAT PROCEDURES:
1. Dust mop floor to remove all dry soil and loose debris prior to cleaning.
2. Clean the surface using NCL® QWIK-SCRUB™ at a 1:10 dilution using a mop and bucket or automatic scrubber and a BLUE cleaning pad. Rinse and allow to dry thoroughly.
3. Using a wet mop or microfiber applicator, apply LVT-PROTECT™ at a rate of 1000 sq. ft. per gallon. Allow to dry thoroughly.
4. On worn, dull, lifeless LVT more than one application will be required. Repeat step 3 as desired, being sure to allow adequate time for drying between each coat.
5. Routine cleaning is recommended using NCL® LVT-CLEAN to prolong the life of the coating and LVT.
-
Features & Benefits
- Wear Layer / Protects floor surface from traffic and spills.
- Low, satin shine / Reveals the true character, color and beauty of the original surface.
- Water resistant coating / Improves the cleaning ability on the surface
- New LVT / To protect and enhance original beauty and look.
- Worn LVT / To restore and revitalize the look.
- Versatile / For use with linoleum, no-wax floors, synthetic floors.
-
Specifications
- AppearanceOpaque, White Liquid
- OdorCharacteristically Acrylic
- Specific Gravity1.01 ± 0.01
- Flash PointNone
- pH8.6 ± 0.3
- Solubility in WaterComplete
- Surface ProtectionOutstanding
- Gloss and Color EnhancingYes
- Safe for use on rubber surfacesYes
- Shelf Life1 year minimum in original unopened container
| Short Description | NCL-2622-29 LVT-PROTECT LUXURY VINYL TILE ENHANCER 1GAL, EA |
|---|