NCL-2612-29 FLEXI-SHEEN RUBBER WAX AND CONDITIONER 1GAL, EA

Directions

ROUTINE/DAILY CLEANING:

FLEXI-SHEEN™ can be used on a daily, on an as-needed basis, quarterly, or semi-annually as traffic dictates. 

1. Dust mop floor with an approved dust mop treatment to remove all dry soil and loose debris prior to cleaning. 
2. Dilute 2-8 oz. of FLEXI-SHEEN™ per gallon of warm water into mop bucket or automatic scrubber. 
3. Mop onto floor or apply through automatic scrubber. 
4. After floor has dried, you may buff floor with a high speed machine and a soft pad in order to achieve a higher gloss. 

INITIAL/RESTORATION Cleaning or After Degreasing using FLEXI-CLEAN™ Intensive Rubber Cleaner and Grease Remover:

1. Dust Mop floor with CONTROL Dust Mop Treatment to remove all dry soil and loose debris prior to cleaning. 
2. Do not dilute FLEXI-SHEEN™ prior to using. Pour undiluted FLEXI-SHEEN™ into mop bucket.
3. Apply FLEXI-SHEEN™ using a wet mop or a flat mopping system. Apply as you would a floor finish (approximately 2,500 - 3,000 square ft. per gallon coverage).
4. Allow the floor to dry thoroughly, 15 - 20 minutes is usually sufficient.
5. For maximum gloss, repeat step 3 and 4.
6. After floor has dried, buffing the floor with a high speed machine and a white or Aqua Magic™ pad will achieve a higher gloss.

• Features & Benefits

  • • Protects floor surface
    • Improves slip resistance
    • Will not build-up or yellow
    • May be high-speed buffed to an excellent gloss